WISTERIA: A4 Purple Floral Background/Backing Paper With Commercial Use
This purple wisteria background/backing paper is designed to match my "Wisteria" card front sheet (cup954412_79993). But it could be a versatile addition to many spring or summer floral projects, from weddings to anniversary printable gift-wrap or gift-bags.
This sheet prints out well (300dpi) at ordinary A4 size, with a small white border at the edge.
It also includes mall-scale commercial use: you can sell anything you physically hand make using this printed sheet, anywhere.
Have lots of fun with this!
Photographs from the Community
 and matching inserts (cup954413_79993), I chose to make a 'pop-out' card using my own template. Printed and cut out all 3 design sheets. A piece of background paper was trimmed just slightly smaller than the front of base card, mounted onto black card with DST, trimmed to leave a narrow border and secured to front of lilac base card with DST. The main topper was then mounted onto black card with DST, trimmed to leave a narrow border and secured centrally to front of card using DST. The last 3 layers were added using foam pads. Inside the card I secured a piece of background paper behind the pop-out panel (so it can be seen through the circle). Two of the inserts were mounted onto black card with DST, trimmed to leave a narrow border and secured with DST either side of the card. To finish I cut the matching gift tag in half, mounted each piece onto black card with DST, trimmed to leave a narrow border and secured with foam pads around the circle of the pop-out. The set of design sheets enables crafters to make lovely simple cards or some just a bit more complicated. Just beautiful, Clare. ){kind=link}
Combining this design with matching main design (cup954412-79993) and matching inserts (cup954413_79993), I chose to make a 'pop-out' card using my own template.
Printed and cut out all 3 design sheets.
A piece of background paper was trimmed just slightly smaller than the front of base card, mounted onto black card with DST, trimmed to leave a narrow border and secured to front of lilac base card with DST.
The main topper was then mounted onto black card with DST, trimmed to leave a narrow border and secured centrally to front of card using DST.
The last 3 layers were added using foam pads.
Inside the card I secured a piece of background paper behind the pop-out panel (so it can be seen through the circle).
Two of the inserts were mounted onto black card with DST, trimmed to leave a narrow border and secured with DST either side of the card.
To finish I cut the matching gift tag in half, mounted each piece onto black card with DST, trimmed to leave a narrow border and secured with foam pads around the circle of the pop-out.
The set of design sheets enables crafters to make lovely simple cards or some just a bit more complicated. Just beautiful, Clare.
 and matching inserts (cup954413_79993), I chose to make a 'pop-out' card using my own template. Printed and cut out all 3 design sheets. A piece of background paper was trimmed just slightly smaller than the front of base card, mounted onto black card with DST, trimmed to leave a narrow border and secured to front of lilac base card with DST. The main topper was then mounted onto black card with DST, trimmed to leave a narrow border and secured centrally to front of card using DST. The last 3 layers were added using foam pads. Inside the card I secured a piece of background paper behind the pop-out panel (so it can be seen through the circle). Two of the inserts were mounted onto black card with DST, trimmed to leave a narrow border and secured with DST either side of the card. To finish I cut the matching gift tag in half, mounted each piece onto black card with DST, trimmed to leave a narrow border and secured with foam pads around the circle of the pop-out. The set of design sheets enables crafters to make lovely simple cards or some just a bit more complicated. Just beautiful, Clare. ){kind=link}
Combining this design with matching main design (cup954412-79993) and matching inserts (cup954413_79993), I chose to make a 'pop-out' card using my own template.
Printed and cut out all 3 design sheets.
A piece of background paper was trimmed just slightly smaller than the front of base card, mounted onto black card with DST, trimmed to leave a narrow border and secured to front of lilac base card with DST.
The main topper was then mounted onto black card with DST, trimmed to leave a narrow border and secured centrally to front of card using DST.
The last 3 layers were added using foam pads.
Inside the card I secured a piece of background paper behind the pop-out panel (so it can be seen through the circle).
Two of the inserts were mounted onto black card with DST, trimmed to leave a narrow border and secured with DST either side of the card.
To finish I cut the matching gift tag in half, mounted each piece onto black card with DST, trimmed to leave a narrow border and secured with foam pads around the circle of the pop-out.
The set of design sheets enables crafters to make lovely simple cards or some just a bit more complicated. Just beautiful, Clare.