![](https://www.craftsuprint.com/theme/cup/images/multi2.png)
![](/assets/cup/zero.png)
![](https://s3.amazonaws.com/cup-images/annmarievaux/large/cup142486_10.jpg)
![Price Promise - You will not find this product cheaper elsewhere!](/assets/cup/bestprice.png)
Blue Church Snow Christmas A5 Locket Card Front
I have designed this card and 3D locket based on a design I have made previously.
The card front measures A5 and this is simply cut out and glued to the the front of any card you have, then you cut out the locket part and attach the end part that has part of the base picture on, this wants to be attached to the matching part of the picture, use a permanent glue/adhesive for that part so it is well glued on.
Then fold the middle section intowards the picture and the locket front the opposite way, these want to be back to back with each other, glue them back to back and you have the lock part completed.
Your card will look as if you have taken ages to make and will impress your friends.
Photographs from the Community
![](https://s3.amazonaws.com/finished-cards/rosina-walker/photo82059.jpg)
![Goldstar](https://www.craftsuprint.com/assets/cup/goldstar.png)
![](https://www.craftsuprint.com/theme/common/images/zero.png)
This is a very nice and that little bit different card,easy to follow instructions,i printed this image onto a sheet of 130g smooth decoupage paper,followed the instructions to assemble it,went around the oval on the inside and the outside with a gold peel off,added some glitter to the snow and icicles,put a silver Merry Christmas on the front,put gold glitter onto the lock on the front of the oval,and all the small dots on the front of the oval,i stuck round dot peel off left over from a corner peel off sheet,added four silver corners and went around the card with silver sparkle peel offs.
![](/assets/cup/askcrafter.png)