The Christmas Angel Half Moon Gatefold Card Kit
Make this beautiful Half Moon Gatefold Card. An unusual card which opens up to reveal a centrepiece, and two pockets with tags either side. There are four tags in total two with verses on and two blank to write your own message on.
You also get a matching envelope and an additional backing paper. The card is just over 7 x7 inches, but could easily be resized if desired.
Jingle All the Way Half Moon Gatefold Card Kit
Starry Starry Night Half Moon Gatefold Card Kit
Ice Princess Half Moon Gatefold Card Kit
Follow Your Dreams Half Moon Gatefold Card Kit
Time with Nana Half Moon Gatefold Card Kit
Blooming Beautiful Half Moon Gatefold Card Kit
Rejoice Half Moon Gatefold Card Kit
Photographs from the Community
I printed the design onto a mixture of 350gsm card and good quality 280gsm photographic paper and cut it out.
I scored the tabs on the back of the card then turned it over.
I added the outside front panels to the tabs using strong double sided tape and then turned it over. I added the back panel using wet glue. I added the inside panels using wet glue. I added the two small pockets to the inside panels using strong double side tape. I then placed one of the greeting tabs and one of the blank tabs to the pockets.
I assembled the decoupage using thin foam tape. I just love it. It will fit into a 7 x 7 envelope or there is a matching envelope if preferred.
I loved making this card it is so beautiful when finished. After printing onto good quality card stock I cut out all the pieces. I attached the side panels to the back and then glued in the inside panels to hide the joins.
I added the decoupage to the front panels using 3D foam pads, and attached the Angel to the inside in the same way.
I attached the pockets to the inside panels and put a sentiment inside one and a blank in the other one to write my message on.
I printed the envelope onto 120gsm paper, cut, scored and folded. I made it up using double sided tape.
I loved making this card it is so beautiful when finished. After printing onto good quality card stock I cut out all the pieces. I attached the side panels to the back and then glued in the inside panels to hide the joins.
I added the decoupage to the front panels using 3D foam pads, and attached the Angel to the inside in the same way.
I attached the pockets to the inside panels and put a sentiment inside one and a blank in the other one to write my message on.
I printed the envelope onto 120gsm paper, cut, scored and folded. I made it up using double sided tape.
I printed the design onto a mixture of 350gsm card and good quality 280gsm photographic paper and cut it out.
I scored the tabs on the back of the card then turned it over.
I added the outside front panels to the tabs using strong double sided tape and then turned it over. I added the back panel using wet glue. I added the inside panels using wet glue. I added the two small pockets to the inside panels using strong double side tape. I then placed one of the greeting tabs and one of the blank tabs to the pockets.
I assembled the decoupage using thin foam tape. I just love it. It will fit into a 7 x 7 envelope or there is a matching envelope if preferred.
I printed the design onto a mixture of 350gsm card and good quality 280gsm photographic paper and cut it out.
I scored the tabs on the back of the card then turned it over.
I added the outside front panels to the tabs using strong double sided tape and then turned it over. I added the back panel using wet glue. I added the inside panels using wet glue. I added the two small pockets to the inside panels using strong double side tape. I then placed one of the greeting tabs and one of the blank tabs to the pockets.
I assembled the decoupage using thin foam tape. I just love it. It will fit into a 7 x 7 envelope or there is a matching envelope if preferred.