Fan Card - Somebunny
This is a new type of card with a 3D fan on the top right corner and a 3D belt with buckle on the body of the card. The kit contains the main card body, a sheet with the inserts, a sheet with the fan and belt pieces, a backing paper and two sheets containing matching envelope pieces. So there are 6 pages in all. Print the main card and fan pieces onto good quality card. The backing paper gets printed onto the back of the main card if desired. Print the inserts and the envelope pieces onto paper. You will need a brad or a gem to finish off the fan.
This card could be used for an anniversary, a birthday, Valentine's Day or just to tell someone you love them (like on Mother's Day!)
Photographs from the Community
I printed the main sheet and the decoupage sheet and cut out the pieces. I cut the main card in half, sticking the front onto a card blank and trimmed to fit, sticking the back panel inside the card.
I joined the fan blades with a brad and stuck the base flat onto the card and the blades with 2mm foam pads to add depth.
I used 1mm foam pads to add the rabbit.
More Products from Craft Box Designs