![](/assets/cup/zero.png)
![](https://s3.amazonaws.com/cup-images/annmarievaux/large/cup462589_10.jpg)
![Price Promise - You will not find this product cheaper elsewhere!](/assets/cup/bestprice.png)
Red Poin Christmas & Year Fancy Swirl Gatefold Card & E Kit
I have designed this kit as a fancy gatefold card and matching envelope.
In this kit you get - 1 sheet picture base & decoupage for front, 1 sheet gatefold side flaps, 1 sheet swirls & decoupage for front, 1 sheet for backing card, 1 sheet envelope front, 2 sheets envelope sides, top and bottom with envelope written and drawn instructions to make the envelope, 1 sheet photo tutorial to make the card, 1 Thank You & Written instructions, 1 Full colour kit preview for guide.
This kit will make 1 card that is a fancy gatefold card that is 7.5inches approx square with matching 8inch square envelope, I would say there is a fair amount of cutting involved for the decoration of the card, but it is worth it.
If you are a new crafter, you might want to read and look at the phototutorial to help..but you will be so pleased with your results and I have tried to make it as easy as possible by doing the hard work of designing statigically placed layers, to give you fab results.
Photographs from the Community
![](https://s3.amazonaws.com/finished-cards/rae-trees/photo614908.jpg)
![Goldstar](https://www.craftsuprint.com/assets/cup/goldstar.png)
I printed the design on good quality matte photo paper. I followed the instructions for assembling. I used scissors and a craft knife to cut out the swirls, not hard to cut.
I used wet glue to stick the swirls to the gate fold sections and foam pads for the decoupage. I added some small red gems to finish. Great design.
![](/assets/cup/askcrafter.png)
![](https://s3.amazonaws.com/finished-cards/susan-smith/photo625396.jpg)
With this design I first printed it out onto white card, I then cut out all the elements including the instructions, I first made up the main card base, then I added the front swirls, using sticky dots to place these onto the front gates, I then made up the design using 2mm sticky pads, this is a beautiful Christmas design which was very easy to cut and make up and is stunning once done
![](/assets/cup/askcrafter.png)