VICTORIANA 4-FOLD POP-OUT CHRISTMAS CARD KITCompleted by Margaret McCartney

I printed the outside of the card and the toppers and greetings onto good quality 260gsm photographic paper and the insert onto 200gsm card and cut these out.

I decided to fold the inside of the card with the blue side to the outside.

You can fold the lines as mountain and valley as shown on the instructions at this point but not the green line as this will be cut as indicated.

When the insert was still folded I took my scissors and cut the green line as shown on the instructions.

When I then straightened it out all I had to do was refold where indicated with the red and blue lines to either mountain or valley fold.

I found it much easier to do this at this point. I then attached the insert using wet glue on the straight panels at either end and slide them into position on the inside of the card as required.

When this was dry I added the toppers and greetings as shown in the preview photo, using wet clue also.

I then added the panel for the front of the card using thin foam tape. An amazing card when finished and quite easy to do. I added some glitter in places to enhance the final card.