CHAMPAGNE CELEBRATIONS RUBY 7.8 Decoupage & Insert Mini Kit

I printed the topper & decoupage sheets onto glossy photo card then personalised the insert & adjusted to exactly the same size as the topper before printing onto 120gsm paper. I used an 8 x 8 card blank & folded back the front. I mounted both the topper & insert onto 2 different coordinating cards then onto white then attached to the folded front using DST.

I added the decoupage using 2mm foam pads. I placed glitter gems in each corner then finished with a double bow made from silky crush ribbon then an organza ribbon which were attached with hot glue.

Printed out and cut out all the elements. I placed the base image onto a white 8 x 8 scallop edge card using d.s. tape and then added the remaining pieces using foam pads.

I then placed my chosen sentiment onto the card.

There is a matching insert included in this kit which I placed inside to finish the card.

I printed the image onto 250gsm glossy photo paper. I took an A4 piece of white cardstock and folded it in half to use as the main card base. Then I took an A4 piece of black glossy cardstock folded it in half and then cut it half and stuck down with pritstick to wrap around the base of the card both to add to the look and also reinforce the bottom of the card to help support the weight of the elements. I then cut out a red piece of corrugated card stock and stuck it in the middle of the card with pritstick to include and enhance the colours in the image. I then stuck on my main card image using mounting pads and cut out the remaining 3D elements and began attaching them using mounting pads. I attached my chosen sentiment in the corner of my main image and then added stickers for the Wording and corners, and pearls and different coloured diamantes for embellishments. For the insert I used part of the 3D elements edited on my PC to match the main image of the card and added my verse and I also printed out an extra 3D element to attach to the envelope so that they all tied in.

A beautiful design that is sure to wow its recipient. Thank You Janet Briggs.

Ruby Wedding Anniversary card for Parents. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used red linen card layered with black & white diamond printed paper. I used dies for sentiments.

I used butterflies from the kit adding gems to their centres. I embellished with lace along the end adding a little red triple bow. I also added a pic of the parents. I finished with the matching insert leaving one side blank to be signed personally. Cup 885824_68. Designer Janet Briggs

I printed this lovely design onto good quality photo paper then mounted onto white card. I added decoupage using 2 mm thick foam pads

Printed out and cut out all the elements. I placed the base image onto a white 8 x 8 scallop edge card using d.s. tape and then added the remaining pieces using foam pads.

I then placed my chosen sentiment onto the card.

There is a matching insert included in this kit which I placed inside to finish the card.

I printed the image onto 250gsm glossy photo paper. I took an A4 piece of white cardstock and folded it in half to use as the main card base. Then I took an A4 piece of black glossy cardstock folded it in half and then cut it half and stuck down with pritstick to wrap around the base of the card both to add to the look and also reinforce the bottom of the card to help support the weight of the elements. I then cut out a red piece of corrugated card stock and stuck it in the middle of the card with pritstick to include and enhance the colours in the image. I then stuck on my main card image using mounting pads and cut out the remaining 3D elements and began attaching them using mounting pads. I attached my chosen sentiment in the corner of my main image and then added stickers for the Wording and corners, and pearls and different coloured diamantes for embellishments. For the insert I used part of the 3D elements edited on my PC to match the main image of the card and added my verse and I also printed out an extra 3D element to attach to the envelope so that they all tied in.

A beautiful design that is sure to wow its recipient. Thank You Janet Briggs.

I printed the image onto 250gsm glossy photo paper. I took an A4 piece of white cardstock and folded it in half to use as the main card base. Then I took an A4 piece of black glossy cardstock folded it in half and then cut it half and stuck down with pritstick to wrap around the base of the card both to add to the look and also reinforce the bottom of the card to help support the weight of the elements. I then cut out a red piece of corrugated card stock and stuck it in the middle of the card with pritstick to include and enhance the colours in the image. I then stuck on my main card image using mounting pads and cut out the remaining 3D elements and began attaching them using mounting pads. I attached my chosen sentiment in the corner of my main image and then added stickers for the Wording and corners, and pearls and different coloured diamantes for embellishments. For the insert I used part of the 3D elements edited on my PC to match the main image of the card and added my verse and I also printed out an extra 3D element to attach to the envelope so that they all tied in.

A beautiful design that is sure to wow its recipient. Thank You Janet Briggs.

Ruby Wedding Anniversary card for Parents. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used red linen card layered with black & white diamond printed paper. I used dies for sentiments.

I used butterflies from the kit adding gems to their centres. I embellished with lace along the end adding a little red triple bow. I also added a pic of the parents. I finished with the matching insert leaving one side blank to be signed personally. Cup 885824_68. Designer Janet Briggs

Ruby Wedding Anniversary card for Parents. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used red linen card layered with black & white diamond printed paper. I used dies for sentiments.

I used butterflies from the kit adding gems to their centres. I embellished with lace along the end adding a little red triple bow. I also added a pic of the parents. I finished with the matching insert leaving one side blank to be signed personally. Cup 885824_68. Designer Janet Briggs

Ruby Wedding Anniversary card for Parents. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used red linen card layered with black & white diamond printed paper. I used dies for sentiments.

I used butterflies from the kit adding gems to their centres. I embellished with lace along the end adding a little red triple bow. I also added a pic of the parents. I finished with the matching insert leaving one side blank to be signed personally. Cup 885824_68. Designer Janet Briggs