Gold Metallic 50 Birthday 7x5in Shaker Frame and Base
I have designed these shaker frame and base sheets in 7x5in size, ideal for your card fronts.
Simply cut out and either decorate the frame layer and use 3D foam or silicone to raise it up and use with your own embellishments or use the base with the frame as a shaker frame, use acetate and add glitter, then simply add a bow and maybe a message if you want.
This set of frames match the backing papers starting at cup nos cup300854_10
Gold Metallic 18th Birthday 7x5in Shaker Frame and Base
Gold Metallic 21 Birthday 7x5in Shaker Frame and Base
Gold Metallic 30 Birthday 7x5in Shaker Frame and Base
Gold Metallic 40 Birthday 7x5in Shaker Frame and Base
Gold Metallic 60 Birthday 7x5in Shaker Frame and Base
Gold Metallic 70 Birthday 7x5in Shaker Frame and Base
Gold Metallic 80 Birthday 7x5in Shaker Frame and Base
Gold Metallic 90 Birthday 7x5in Shaker Frame and Base
Gold Metallic 100 Birthday 7x5in Shaker Frame and Base
Photographs from the Community
I cut out my design, including cutting out the oval frame on the second part of the design. I used a brown card and added some gold glitter paper to the base. I then fixed the first half of the design to my base card.
I carefully squeezed a bed of glue around the edge of the oval and let that dry. I added some little gold beads into the open centre. Into my cut out oval on my second part, I glued a piece of acetate.
I then secured 4 foam pads to the corners of the design before adding a little more silicone to the original bead of silicone and carefully placing the second part of the oval onto the wet silicone of the base.
I added a 50th Peel off sticker and a greeting.
