![](/assets/cup/zero.png)
![](https://s3.amazonaws.com/cup-images/annmarievaux/large/cup90917_10.jpg)
![Price Promise - You will not find this product cheaper elsewhere!](/assets/cup/bestprice.png)
Choirboy Knocking Spiral Edge Stacker Card Front
I have designed this new concept to create a spiral edge stacker around a card front.
This is a 5inch x 5inch square card front, and you simply cut out the base image and attach
to your card or project flat, then cut out the edges starting at number 1. Glue your edges using
a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
Photographs from the Community
![](https://s3.amazonaws.com/finished-cards/susan-smith/photo28889.jpg)
![Goldstar](https://www.craftsuprint.com/assets/cup/goldstar.png)
With this design i placed a light blue backing paper onto a 6x6 card, i then placed the main design base at the top of the card, i added a gold border and corners all round the outside edges of the card, i built up the spiral pyramid as instructed,and finished off with a white and silver bow and a gold happy christmas under the design.
This is a terrific design when made up.
![](/assets/cup/askcrafter.png)