Christmas Snow Steeple Spiral Edge Stacker Card Front
I have designed this new concept to create a spiral edge stacker around a card front.
This is a 5inch x 5inch square card front, and you simply cut out the base image and attach
to your card or project flat, then cut out the edges starting at number 1. Glue your edges using
a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
Photographs from the Community
The image was printed out onto 180grm everyday, glossy photo paper. Gold mirri card was trimmed as a background and matted to a 5 x 7 card with double sided sticky tape as was the main image. 2mm foam tape was used for the layers.
Gold peel-off bells and a Christmas greeting were added. Finally, using gliter glue, white glitter was added to some of the snow areas. Another gorgeous design in the spiral Edge Stacker series.
