Lavender View Spiral Edge Stacker 7x5in Card Front
I have designed this card front in my spiral edge stacker concept to create a spiral edge
around the card front.
This is a 7inch x 5inch square card front so it will fit the A5 cards if you add a backing paper.
Simply cut out the base image and attach to your card or project flat, then cut out the edges starting at number 1.
Glue your edges using a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
Photographs from the Community
With this design i first placed a mauve backing paper on to the front of a 7x5 card, then added a gold border all round the outside edges of the card, then placed the main design base in the centre, so to give the design a framed effect, to finish i built up the design, this is a bueatiful design the colours are fab, and it was very easy to make up, i used imm sticky pads on this card.