Oriental Peonies Spiral Wavy Edge Stacker Card Front
I have designed this based on my original concept to create a spiral edge stacker around a card front
however this design has the wavy edges as you build the layers. The edges are easy to cut out with being wavy.
This is a 5inch x 5inch square card front, and you simply cut out the base image and attach
to your card or project flat, then cut out the edges starting at number 1. Glue your edges using
a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
Photographs from the Community
I printed off the design onto good quality photographic paper and cut it out. I assembled the spiral wavy edge stacker. I scored and folded a square card. I attached some oriental background paper from my craft box to the card with double sided tape.
I then attached the design to the card also using double sided tape.
