Set of 6 Christmas toppers with winter themes and choice of sentiments
A set of 6 toppers for your Christmas cards. All have a winter background and cute images of Father Christmas, snowmen, snowlady, eskimo child and santa mouse.All are square and can be resized.
Also included are 6 sentiments with the wording,'Merry Christmas' which are in different colours which co-ordinate with the toppers,allowing you to mix and match.
Photographs from the Community
:
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.){kind=link}
I had lots of fun using this topper set and made a range of cards, all relatively quick and simple - some more than others. I printed the topper sheet, then made the cards as follows (from back left round to bottom left):
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.
:
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.){kind=link}
I had lots of fun using this topper set and made a range of cards, all relatively quick and simple - some more than others. I printed the topper sheet, then made the cards as follows (from back left round to bottom left):
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.
:
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.){kind=link}
I had lots of fun using this topper set and made a range of cards, all relatively quick and simple - some more than others. I printed the topper sheet, then made the cards as follows (from back left round to bottom left):
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.
:
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.){kind=link}
I had lots of fun using this topper set and made a range of cards, all relatively quick and simple - some more than others. I printed the topper sheet, then made the cards as follows (from back left round to bottom left):
1. Snowman and child: Cut out 4 6.5 x 6.5 patterned squares and layered onto 14.5 x 14.5 teal mirriboard. Layered this panel onto 15 x 15 card. Layered topper onto teal mirriboard and stuck this to panel with foam pads. Added sentiment to topper with pads.
2. Snowman easel card: Folded 10.5 x 15 card to make easel base. Created two panels by layering sparkly spotted paper onto gold mirriboard. Layered panels onto easel base and card front. Layered snowman topper onto gold mirriboard and stuck this onto green card background with foam pads. Layered this panel onto front of card with foam pads. Added star stickers to corners of snowman panel. Added snowflake corner peel-offs to base panel. Finished with 'Christmas Wishes' sentiment attached with pads.
3. Layered white 10.5 x 15 card with patterned paper. Layered Father Christmas topper onto red card and added this to card front using foam pads. Layered 'Merry Christmas' sentiment onto red card and added white gems. Layered sentiment panel to card front.
Next three cards all used 10 x 10 card blanks.
4. Snowman: Used glitter pen over scarf and nose. Layered topper to silver card. Layered silver card, then red card onto card front. Stuck on snowman panel with foam pads. Added silver gem to each corner.
5. Mouse: A very quick make created by adhering mouse topper and sentiment onto card front with tape and then drawing gold pen stitch effect around edge of topper.
6. Snow lady: Adhered topper onto card with tape. Cut out scalloped frame from Kraft card using nesting dies. Coloured frame in with sparkle pen then used foam pads to stick onto card front over topper. Added sentiment and green and red gems.
More Products from Julie Hassall
