Thank You - Twisted Tunnel Topper
A Bright, Fun and Funky design With Metallic Greeting and stars.
A really easy Twisted Tunnel quick card topper design that is just under 10 x 10 cm just cut out the tunnel layers and add using foam tape or silicone to create a stunning 3d effect that that twists and spirals and draws your eye to the centre.
Three small matching toppers that are approx 6 x 6 cm are also included on the sheet, these can be used on their own or inside or on the back of your card, and would also make great gift tags too! Or why not include your contact details on the back of one the toppers, and pop in with your finished card ... for future orders!
This design is also available in other coordinating colourways/designs and together they would make a great set of cards to sell at craft fairs etc.
This sheet will also make great shaker cards too!!
Photographs from the Community
. I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems. ){kind=link}
These fun twisted tunnel toppers offer so many different ways to be creative!
For the basic card, twist and stack the 3 smaller squares onto the main image using 3D foam for each layer. (Follow the diagram for the twist positions). I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems.
. I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems. ){kind=link}
These fun twisted tunnel toppers offer so many different ways to be creative!
For the basic card, twist and stack the 3 smaller squares onto the main image using 3D foam for each layer. (Follow the diagram for the twist positions). I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems.
. I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems. ){kind=link}
These fun twisted tunnel toppers offer so many different ways to be creative!
For the basic card, twist and stack the 3 smaller squares onto the main image using 3D foam for each layer. (Follow the diagram for the twist positions). I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems.
. I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems. ){kind=link}
These fun twisted tunnel toppers offer so many different ways to be creative!
For the basic card, twist and stack the 3 smaller squares onto the main image using 3D foam for each layer. (Follow the diagram for the twist positions). I mounted it onto a 13cm stripy card blank, added another topper inside and finished with gems.
For a twisted tunnel card with an added twist, I made a pink card blank 10.5cm square. Scored and folded the front diagonally then glued a piece of pink card 10.5cm square onto the lower triangle to create a twisted easel as shown. I added a full topper panel to the inside and used a star (cut out) with 3D foam to create a stopper. I finished the front with 3 smaller toppers layered as per card 1 for a magic swirling effect and added pink and purple gems.