An Exciting Moulding Project
Houses have been moulded using shape cutters which are pressed into a layer of sand on a paint tray. Stone and glass mosaic have been pushed into the sand and finally the casting compound is poured into the shape cutter.
1
Sand is poured into a flat layer in the paint tray.
2
Place stones, sticks or mosaic in the tray and press down lightly into the sand.
3
Grease the shape cutter with a little cooking oil and press it down lightly over the stones.
4
Mix the casting compound following the instructions on the packaging and pour it carefully into the shape cutter. Dry for approximately 30 minutes.
5
Gently press out the shape cutter. Paint the edges with diluted Plus Color Craft Paint.
