1. Use 4 x 60cm pieces of leather cord. Bend them on the middle. Tie a little "guiding cord" in the middle and attach it to the macram board. 2. Divide the cords so that there are 4 in each hand. Spread them so that they are lying next to each other. 3. Start with the cord from the right side, and pull it, over all the cords to the left side. 4. Put the cord down between 2nd and 3rd cord on the left side. 5. Now pull the cord underneath the cords and back to were it came from. It shall now be lying closest to the middle on the right side. 6. Repeat from the opposite side. Remember to tighten it along the way! 7. Continue from right to left until the macram has the wanted length. 8. Cut the ends and tape them, so that the won't unfold. 9. Put instant glue in the end cap. Remove the tape and glue the end caps onto the cords. Finish the bracelet by putting 2 metallic beads onto a piece of elastic cord. Tie the elastic cord to the end caps, add some instant glue, and hide the knots in the hole of the bead.
Afslut armb ndet med 2 metallicperler p elastik. Bind elastikken fast i ender rene, giv lidt lim og skjul knuderne i perlernes huller.