How to Make Worry Beads

Komboloi worry beads are a Greek fidget toy, used to relieve stress and generally pass the time. Here's how you can make your own set... for fun... or stress relief.

1. 

    Obtain your beads.
   Obtain your beads. Traditionally, worry beads have an odd number of beads, usually one more than a multiple of four, 5, 9, 13, etc. Additionally, you will need one "shield" bead, usually somewhat larger than the others. Natural materials such as stone, amber, and wood are considered more pleasant to handle, but you may use any type of bead you like.

    

2. 

    Obtain or make a tassel.
   Obtain or make a tassel. (optional)
3. 

    Cut your cordage.
   Cut your cordage. Typically, the length of a loop of worry beads is two hand widths, so cut your cord at least 4 hand widths long, plus enough room to attach the shield and tassel.
4. 

    String your smaller beads onto the cordage.
   String your smaller beads onto the cordage.
5. 

    Thread both ends of the string through the larger "shield" bead.
   Thread both ends of the string through the larger "shield" bead.
6. 

    Tie a knot to hold everything on the string.
   Tie a knot to hold everything on the string. A simple overhand knot will work fine so long as the diameter of the string is close to the inside diameter of the bead hole. If your string is significantly smaller than the holes in your beads, you may need to use a bulkier knot.
7. 

    Attach your tassel (if desired).
   Attach your tassel (if desired).
8. 

    Twiddle with your very own worry beads to relieve your stress!.
   Twiddle with your very own worry beads to relieve your stress!

    

• Use a sturdy, smooth cordage which allows the beads to slide freely.
• Use beads with smooth edges to avoid discomfort or cuts when handling them.

• Exercise appropriate caution when cutting the cordage.