How to Make a BBQ Hat and Apron

There isn't a much better way to throw a great get-together or party than to kick things off with an awesome barbeque. Just one problem: Without a hat or apron you may not get the respect you deserve! Worry not, these detailed instructions will show you just how to create your very own custom hat and apron. It might not help your grill skills, but it will definitely help your BBQ image!

Steps

Cut the pattern pieces: the body of the apron, the top piece of the chef hat, the band for the chef hat, the ties for the apron, and the apron neck strap. Distort sizes based on your own body type, but good basic angles are as follows:
- Apron: 11 inches across the neckline, 21 inches across the chest, 23 inches across the bottom line, 10 inches from the neckline to the chest (vertical, down the center of the apron), 25 inches from the chest to the bottom of the apron (vertical, down the center of the apron).
  
  Apron: 11 inches across the neckline, 21 inches across the chest, 23 inches across the bottom line, 10 inches from the neckline to the chest (vertical, down the center of the apron), 25 inches from the chest to the bottom of the apron (vertical, down the center of the apron).
- Neck strap: 24 inches long, 3 inches wide.
- Apron ties (two of them): 56 inches long, 2 inches wide.
- Top piece of the hat: 20 inches in diameter (across the entire piece).
  
  Top piece of the hat: 20 inches in diameter (across the entire piece).
- Hat band: equivalent to your head measurement in inches for the length, plus an additional inch for seam allowance. Width is 8.5 inches.

Apron

Lay out the cloth you will be using for the apron, iron out any creases, and lay the apron pattern over the cloth.

Lay out the cloth you will be using for the apron,iron out any creases, and lay the apron pattern over the cloth.
Trace around the pattern with tailor's chalk, and cut the pattern out.

Trace around the pattern with tailor's chalk, and cut the pattern out.
Flip the material over so that the "wrong" side faces up.

Flip the material over so that the "wrong" side faces up. Fold over a quarter-inch hem (fold twice if you'd like) and sew it down.
Do the same along all of the inside edges; the top, sides, chest area, and bottom.

Do the same along all of the inside edges; the top, sides, chest area, and bottom. Make sure to press each hem after you're finished sewing it.
Take out more fabric for the neck strap and cut out the piece.

Take out more fabric for the neck strap and cut out the piece.
Fold the piece over and press it with the iron.

Fold the piece over and press it with the iron.
Then, unfold it, and fold those sides in half so that they meet in the crease, and press those sides with the iron.

Then, unfold it, and fold those sides in half so that they meet in the crease, and press those sides with the iron.
Fold in the end pieces and press with the iron.

Fold in the end pieces and press with the iron.
Clip the corners of the strap at an angle.

Clip the corners of the strap at an angle. Fold the strap in on itself and press it with the iron. Sew the strap along all three open ends.
Attach the strap to the inside of the apron piece.

Attach the strap to the inside of the apron piece.Sew the strap on using a square formation pattern.
Create the apron ties the same way you created the neck strap, just make them a little longer and not quite as wide.

Create the apron ties the same way you created the neck strap, just make them a little longer and not quite as wide.
Attach them in the same manner that the neck strap was attached, on the corner of the chest area and sides of the apron.

Attach them in the same manner that the neck strap was attached, on the corner of the chest area and sides of the apron. The apron is finished!

Chef Hat

Cut out the top piece of the chef hat from the pattern using the tailor chalk and scissors or another cutting device.

Cut out the top piece of the chef hat from the pattern using the tailor chalk and scissors or another cutting device.
Stitch all the way around the edge of the pattern using the longest stitch length, locking the stitch at the beginning, but not at the end.

Stitch all the way around the edge of the patternusing the longest stitch length, locking the stitch at the beginning, but not at the end.
Cut out the hat band cloth from the pattern using the tailor chalk and scissors or another cutting device.

Cut out the hat band cloth from the pattern using the tailor chalk and scissors or another cutting device. Make sure you measure your own head (or whoever will be wearing the hat) to determine the size of the hat necessary. Adjust the hat band according to size.
Fold the cloth in half "wrong" sides together and press with the iron.

Fold the cloth in half "wrong" sides together and press with the iron.
Fold and press an inch seam allowance down both sides.

Fold and press an inch seam allowance down both sides.
Fold the band "right" sides together and sew a seam down the side.

Fold the band "right" sides together and sew a seam down the side.
Press the seam open with the iron and fold the band together "right" sides out.

Press the seam open with the iron and fold the band together "right" sides out.
Grab the circle pattern with the loose stitching and pull the stitch (make sure it's fairly even throughout) until it's about the same size as the band you created.

Grab the circle pattern with the loose stitching and pull the stitch (make sure it's fairly even throughout) until it's about the same size as the band you created.
Carefully press the bottom edge of the circle against the open end of the band and pin.

Carefully press the bottom edge of the circleagainst the open end of the band and pin.
Do this all the way around the open seams and sew the two pieces together.

Do this all the way around the open seams and sewthe two pieces together. Be sure to catch the other side of the band as you sew. Now you're totally done!